Waste is something that you can never avoid when doing construction, but it is not necessarily a problem so long as it can be dealt with appropriately. Technology has become so instrumental in preventing waste in the oil industry, and that technology is Solids Control.
Solid control is becoming more critical with an increase in technical demands of drilling oil and gas. The use of high-efficiency solid control maximizing solids separations from drilling fluids improves drilling rates and reduces the rate of dilution, and even lower drilling expenses further. Here are the reasons why solid control is becoming a game-changer in the oil industry.
Disposing of waste drilling fluid
After completing collecting solids, the waste drilling fluid will have to be handled and dispose of. Usually, non-toxic waste does not have to be necessarily be treated away any further. Any oil-based or synthetic muds will have to be treated. This is because they are usually toxic and can cause so much damage to the environment’s surface. If these fluids are treated and disposed of well, it reduces the need to use more mud products to maintain the proper mechanisms and mud quality formation.
Increase the life of the usable fluid
Solid control has genuinely helped the oil industry to be more maintainable. When a company uses a better solid control system, it will increase their fluid’s usable life significantly by up to two to three times. This is advantageous to the oil companies as it is no longer acceptable to dump mud or dilute them.
A company can make mud quality useful for recirculation. To do so, they have to keep the content of solid in the mud below 5%. And as they re-use mud and fluid several times, solid control will eventually become a more economical way of drilling oil.
Reduce drill bit penetration
It is critical to keep the concentration of solids in drilling mud down to a certain level as it helps reduce the excess drill bit penetration. This helps to dodge the risk of instability caused by long periods with an open borehole, and as a result, reduces drilling costs.
Safe and efficient heat transfer
Solid control services, mud cooling systems are suitable for use on drilling projects. They are designed for effective control of drilling fluid temperatures, and as a result, they improve safety and reduce costs. The system is skid mounted and certified fully for ease of transport of waste.
Safe cleaning of tanks and pits
The system used for cleaning pits and tanks is complaint and design to reduce waste while operating safely in zones with a potentially explosive atmosphere. This is important as it minimizes exposure to hazardous materials, reclaim valuable fluids for re-use, safe transportation of dangerous fluids, and waste effectively. If further minimizes manual handling
Finally, if you are considering solid control for your oil company, adopt this technology. It is the best option that will help you manage your waste as you minimize the environmental impact. And save on cost.